Linux manual pages Section 4  

Name

tty_ioctl — ioctls for terminals and serial lines

Synopsis

        #include <termios.h>
int ioctl( int fd,
  int cmd,
  ...);
 

DESCRIPTION

The ioctl(2) call for terminals and serial ports accepts many possible command arguments. Most require a third argument, of varying type, here called argp or arg.

Use of ioctl makes for nonportable programs. Use the POSIX interface described in termios(3) whenever possible.

Get and set terminal attributes

TCGETS struct termios *argp

Equivalent to tcgetattr(fd, argp).

Get the current serial port settings.

TCSETS const struct termios *argp

Equivalent to tcsetattr(fd, TCSANOW, argp).

Set the current serial port settings.

TCSETSW const struct termios *argp

Equivalent to tcsetattr(fd, TCSADRAIN, argp).

Allow the output buffer to drain, and set the current serial port settings.

TCSETSF const struct termios *argp

Equivalent to tcsetattr(fd, TCSAFLUSH, argp).

Allow the output buffer to drain, discard pending input, and set the current serial port settings.

The following four ioctls are just like TCGETS, TCSETS, TCSETSW, TCSETSF, except that they take a struct termio * instead of a struct termios *.

  • TCGETA struct termio *argp

  • TCSETA const struct termio *argp

  • TCSETAW const struct termio *argp

  • TCSETAF const struct termio *argp

Locking the termios structure

The termios structure of a terminal can be locked. The lock is itself a termios structure, with nonzero bits or fields indicating a locked value.

TIOCGLCKTRMIOS struct termios *argp

Gets the locking status of the termios structure of the terminal.

TIOCSLCKTRMIOS const struct termios *argp

Sets the locking status of the termios structure of the terminal. Only a process with the CAP_SYS_ADMIN capability can do this.

Get and set window size

Window sizes are kept in the kernel, but not used by the kernel (except in the case of virtual consoles, where the kernel will update the window size when the size of the virtual console changes, for example, by loading a new font).

The following constants and structure are defined in <sys/ioctl.h>

TIOCGWINSZ struct winsize *argp

Get window size.

TIOCSWINSZ const struct winsize *argp

Set window size.

The struct used by these ioctls is defined as

struct winsize {
  unsigned short   ws_row;  
  unsigned short   ws_col;  
  unsigned short   ws_xpixel;
/* unused */
  unsigned short   ws_ypixel;
/* unused */
};

When the window size changes, a SIGWINCH signal is sent to the foreground process group.

Sending a break

TCSBRK int arg

Equivalent to tcsendbreak(fd, arg).

If the terminal is using asynchronous serial data transmission, and arg is zero, then send a break (a stream of zero bits) for between 0.25 and 0.5 seconds. If the terminal is not using asynchronous serial data transmission, then either a break is sent, or the function returns without doing anything. When arg is nonzero, nobody knows what will happen.

(SVr4, UnixWare, Solaris, Linux treat tcsendbreak(fd,arg) with nonzero arg like tcdrain(fd). SunOS treats arg as a multiplier, and sends a stream of bits arg times as long as done for zero arg. DG/UX and AIX treat arg (when nonzero) as a time interval measured in milliseconds. HP-UX ignores arg.)

TCSBRKP int arg

So-called "POSIX version" of TCSBRK. It treats nonzero arg as a timeinterval measured in deciseconds, and does nothing when the driver does not support breaks.

TIOCSBRK void

Turn break on, that is, start sending zero bits.

TIOCCBRK void

Turn break off, that is, stop sending zero bits.

Software flow control

TCXONC int arg

Equivalent to tcflow(fd, arg).

See tcflow(3) for the argument values TCOOFF, TCOON, TCIOFF, TCION.

Buffer count and flushing

FIONREAD int *argp

Get the number of bytes in the input buffer.

TIOCINQ int *argp

Same as FIONREAD.

TIOCOUTQ int *argp

Get the number of bytes in the output buffer.

TCFLSH int arg

Equivalent to tcflush(fd, arg).

See tcflush(3) for the argument values TCIFLUSH, TCOFLUSH, TCIOFLUSH.

Faking input

TIOCSTI const char *argp

Insert the given byte in the input queue.

Redirecting console output

TIOCCONS void

Redirect output that would have gone to /dev/console or /dev/tty0 to the given terminal. If that was a pseudoterminal master, send it to the slave. In Linux before version 2.6.10, anybody can do this as long as the output was not redirected yet; since version 2.6.10, only a process with the CAP_SYS_ADMIN capability may do this. If output was redirected already EBUSY is returned, but redirection can be stopped by using this ioctl with fd pointing at /dev/console or /dev/tty0.

Controlling terminal

TIOCSCTTY int arg

Make the given terminal the controlling terminal of the calling process. The calling process must be a session leader and not have a controlling terminal already. For this case, arg should be specified as zero.

If this terminal is already the controlling terminal of a different session group, then the ioctl fails with EPERM, unless the caller has the CAP_SYS_ADMIN capability and arg equals 1, in which case the terminal is stolen, and all processes that had it as controlling terminal lose it.

TIOCNOTTY void

If the given terminal was the controlling terminal of the calling process, give up this controlling terminal. If the process was session leader, then send SIGHUP and SIGCONT to the foreground process group and all processes in the current session lose their controlling terminal.

Process group and session ID

TIOCGPGRP pid_t *argp

When successful, equivalent to *argp = tcgetpgrp(fd).

Get the process group ID of the foreground process group on this terminal.

TIOCSPGRP const pid_t *argp

Equivalent to tcsetpgrp(fd, *argp).

Set the foreground process group ID of this terminal.

TIOCGSID pid_t *argp

Get the session ID of the given terminal. This will fail with ENOTTY in case the terminal is not a master pseudoterminal and not our controlling terminal. Strange.

Exclusive mode

TIOCEXCL void

Put the terminal into exclusive mode. No further open(2) operations on the terminal are permitted. (They will fail with EBUSY, except for a process with the CAP_SYS_ADMIN capability.)

TIOCGEXCL int *argp

If the terminal is currently in exclusive mode, place a nonzero value in the location pointed to by argp; otherwise, place zero in *argp (since Linux 3.8).

TIOCNXCL void

Disable exclusive mode.

Line discipline

TIOCGETD int *argp

Get the line discipline of the terminal.

TIOCSETD const int *argp

Set the line discipline of the terminal.

Pseudoterminal ioctls

TIOCPKT const int *argp

Enable (when *argp is nonzero) or disable packet mode. Can be applied to the master side of a pseudoterminal only (and will return ENOTTY otherwise). In packet mode, each subsequent read(2) will return a packet that either contains a single nonzero control byte, or has a single byte containing zero (' ') followed by data written on the slave side of the pseudoterminal. If the first byte is not TIOCPKT_DATA (0), it is an OR of one or more of the following bits:

TIOCPKT_FLUSHREAD   The read queue for the terminal is flushed.
TIOCPKT_FLUSHWRITE  The write queue for the terminal is flushed.
TIOCPKT_STOP        Output to the terminal is stopped.
TIOCPKT_START       Output to the terminal is restarted.
TIOCPKT_DOSTOP      The start and stop characters are ^S/^Q.
TIOCPKT_NOSTOP      The start and stop characters are not ^S/^Q.

While this mode is in use, the presence of control status information to be read from the master side may be detected by a select(2) for exceptional conditions.

This mode is used by rlogin(1) and rlogind(8) to implement a remote-echoed, locally ^S/^Q flow-controlled remote login.

TIOGCPKT const int *argp

Return the current packet mode setting in the integer pointed to by argp (since Linux 3.8).

TIOCSPTLCK int *argp

Set (if *argp is nonzero) or remove (if *argp is zero) the pseudoterminal slave device. (See also unlockpt(3).)

TIOCGPTLCK int *argp

Place the current lock state of the pseudoterminal slave device in the location pointed to by argp (since Linux 3.8).

The BSD ioctls TIOCSTOP, TIOCSTART, TIOCUCNTL, TIOCREMOTE have not been implemented under Linux.

Modem control

TIOCMGET int *argp

Get the status of modem bits.

TIOCMSET const int *argp

Set the status of modem bits.

TIOCMBIC const int *argp

Clear the indicated modem bits.

TIOCMBIS const int *argp

Set the indicated modem bits.

The following bits are used by the above ioctls:

TIOCM_LE        DSR (data set ready/line enable)
TIOCM_DTR       DTR (data terminal ready)
TIOCM_RTS       RTS (request to send)
TIOCM_ST        Secondary TXD (transmit)
TIOCM_SR        Secondary RXD (receive)
TIOCM_CTS       CTS (clear to send)
TIOCM_CAR       DCD (data carrier detect)
TIOCM_CD         see TIOCM_CAR
TIOCM_RNG       RNG (ring)
TIOCM_RI         see TIOCM_RNG
TIOCM_DSR       DSR (data set ready)
TIOCMIWAIT int arg

Wait for any of the 4 modem bits (DCD, RI, DSR, CTS) to change. The bits of interest are specified as a bit mask in arg, by ORing together any of the bit values, TIOCM_RNG, TIOCM_DSR, TIOCM_CD, and TIOCM_CTS. The caller should use TIOCGICOUNT to see which bit has changed.

TIOCGICOUNT struct serial_icounter_struct *argp

Get counts of input serial line interrupts (DCD, RI, DSR, CTS). The counts are written to the serial_icounter_struct structure pointed to by argp.

[Note] Note

Both 1->0 and 0->1 transitions are counted, except for RI, where only 0->1 transitions are counted.

Marking a line as local

TIOCGSOFTCAR int *argp

("Get software carrier flag") Get the status of the CLOCAL flag in the c_cflag field of the termios structure.

TIOCSSOFTCAR const int *argp

("Set software carrier flag") Set the CLOCAL flag in the termios structure when *argp is nonzero, and clear it otherwise.

If the CLOCAL flag for a line is off, the hardware carrier detect (DCD) signal is significant, and an open(2) of the corresponding terminal will block until DCD is asserted, unless the O_NONBLOCK flag is given. If CLOCAL is set, the line behaves as if DCD is always asserted. The software carrier flag is usually turned on for local devices, and is off for lines with modems.

Linux-specific

For the TIOCLINUX ioctl, see console_ioctl(4).

Kernel debugging

#include <linux/tty.h>

TIOCTTYGSTRUCT struct tty_struct *argp

Get the tty_struct corresponding to fd. This command was removed in Linux 2.5.67.

RETURN VALUE

The ioctl(2) system call returns 0 on success. On error, it returns −1 and sets errno appropriately.

ERRORS

EINVAL

Invalid command parameter.

ENOIOCTLCMD

Unknown command.

ENOTTY

Inappropriate fd.

EPERM

Insufficient permission.

EXAMPLE

Check the condition of DTR on the serial port.

#include <termios.h>
#include <fcntl.h>
#include <sys/ioctl.h>

int
main(void)
{
    int fd, serial;

    fd = open("/dev/ttyS0", O_RDONLY);
    ioctl(fd, TIOCMGET, &serial);
    if (serial & TIOCM_DTR)
        puts("TIOCM_DTR is set");
    else
        puts("TIOCM_DTR is not set");
    close(fd);
}

SEE ALSO

ldattach(1), ioctl(2), termios(3), console_ioctl(4), pty(7)

COLOPHON

This page is part of release 4.07 of the Linux man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at https://www.kernel.org/doc/man−pages/.


  Copyright 2002 Walter Harms <walter.harmsinformatik.uni-oldenburg.de>
and Andries Brouwer <aebcwi.nl>.

%%%LICENSE_START(GPL_NOVERSION_ONELINE)
Distributed under GPL
%%%LICENSE_END